Support Equipment

Frac Tanks

frac7frac3Frac4
Capacity: 5,640 Gallons
Compartment: Single
Shell: ¼” Plate x 60″ OD
Welds: Submerged – Arc
Interior Baffles: (2) ¼” plate
Stiffeners: (8) 3/8″ x 2 ½” external rings
Frame: 4″ x 10″ ¼ wall tubing full length
Fenders: Full length hose pan with beveled interior with formed supports and tie downs
Bumper: Rear entry with tow eye and full deflector pan across rear
Manways: (3) 25″ on top with 21″ on rear head, domed type with wing nuts
Handrail: Full length bolted on with rear access
Work Lights: two rear area work lights
Tool Box: 18″ x 18″ x 36″ mounted on driver’s side
Lights: DOT lights and reflectors
Gauge: Float level pointer with stainless ball or sight gauges
Outlets: (2) 4″ Butterfly valves at rear with a wedge sump, pressure & vacuum release standard other valves at customer discretion (additional charge)
Landing Gear: 2-Speed heavy duty
Shut Off: Stainless ball primary – Ball type secondary 12 gallon with drain into 2″ blow down line with gauge on rear
Suspension: Spring (on all trailers) or Air Ride
Axles: 22,500 lbs.
Wheels: 10 Hole Steel
Tires: 11:00 x 24.5 Radial
Brakes: ABS with spring parking
Mud Flaps: Anti-Sail with logo
Coating: Surface blast Interior 12 Mil epoxy liner; Exterior epoxy primer with Polyurethane color.
*Self contained pump units available.

Vacuum Trailers – 130 bbl

vacuum1
Capacity: 5,640 Gallons
Compartment: Single
Shell: ¼” Plate x 60″ OD
Welds: Submerged – Arc
Interior Baffles: (2) ¼” plate
Stiffeners: (8) 3/8″ x 2 ½” external rings
Frame: 4″ x 10″ ¼ wall tubing full length
Fenders: Full length hose pan with beveled interior with formed supports and tie downs
Bumper: Rear entry with tow eye and full deflector pan across rear
Manways: (3) 25″ on top with 21″ on rear head, domed type with wing nuts
vacuum2
Handrail: Full length bolted on with rear access
Work Lights: two rear area work lights
Tool Box: 18″ x 18″ x 36″ mounted on driver’s side
Lights: DOT lights and reflectors
Gauge: Float level pointer with stainless ball or sight gauges
Outlets: (2) 4″ Butterfly valves at rear with a wedge sump, pressure & vacuum release standard other valves at customer
discretion (additional charge)
Landing Gear: 2?Speed heavy duty
Shut Off: Stainless ball primary – Ball type secondary 12 gallon with drain into 2″ blow down line with gauge on rear
Suspension: Spring (on all trailers) or Air Ride
Axles: 22,500 lbs.
Vacuum3
Wheels: 10 Hole Steel
Tires: 11:00 x 24.5 Radial
Brakes: ABS with spring parking
Mud Flaps: Anti?Sail with logo
Coating: Surface blast Interior 12 Mil epoxy liner; Exterior epoxy primer with Polyurethane color.
*Self contained pump units available.

Pressure Vessels / Tanks

VESSEL FABRICATION

VESSELS – ASME Div. 1
TOWERS – ASME Div. 1
REACTORS – ASME Div. 1
COMPRESSOR VESSELS – ASME Div. 1

PACKAGED EQUIPMENT

SEPARATOR SKID UNITS
TREATER SKID UNITS
DEHYDRATION SKID UNITS
PIG LAUNCHER SKID UNITS
VENT SCRUBBER SKID UNITS

OTHER EQUIPMENT

STACKS
PIPELINE STRAINERS
PIPE SPOOLS
SKIDS

MATERIALS OF CONSTRUCTION

Carbon Steel – Carbon Steel for Nace (Sour Service)

300 Series Stainless Steels – 2205 Duplex Stainless Steels

Chrome Alloys – C276 Hastelloy – B3 Hastelloy

FRP Piping – Duplex Overlay

ENGINEERING & DESIGN

ASME Section VIII, Division 1 Pressure Vessel Design

Utilizing Advanced Pressure Vessel Design and Compress Pressure Vessel Design Software

Finite Element Analysis and 3D Design utilizing ANSYS FEA and Pro-Engineering Software

Drafting capabilities utilizing AutoCad 2009 Software

SHOP SQUARE FOOTAGE

Current under crane footage is approx. 36,900 SF

SHOP EQUIPMENT

The fabrication bay has a thirty-four foot hook height which includes (2) 50 Ton, (1) 40 Ton, (1) 20 Ton, and (2) 10 Ton cranes. The machine shop bay has (1) 6000# crane with a thirteen foot hook height.

SHOP TOOLS & EQUIPMENT

  • 14,000# WELDING POSITIONER
  • 120,000# SET TURNING ROLLS
  • 6000# WELDING POSITIONER
  • 80,000# SET TURNING ROLLS
  • 2,500# WELDING POSITIONER
  • 30,000# SET TURNING ROLLS
  • 1,000# WELDING POSITIONER
  • 20,000# SET TURNING ROLLS
  • 22,500# FORK LIFT
  • 8,000# SET TURNING ROLLS
  • 15,000# FORK LIFT
  • 4,000# SET TURNING ROLLS
  • 200 AMP PLASMA ARC SYSTEM
  • 9,000# FORK LIFT
  • HIGH FREQUENCY HELIARC
  • 600 AMP LINCOLN SUBARCS

VARIOUS MILLER WIRE FEED WELDERS

  • BRIDGEPORT MILL
  • CINCINNATI BICKFORD DRILL PRESS
  • CNC 5-AXIS PLASMA/OXY-FUEL PLATE CUTTING MACHINE
  • PLATE ROLLER – ½" THK. CAPACITY x 8′
  • PLATE ROLLER – 1-3/8” THK. CAPACITY x 12’
  • ENGINE LATHE

CERTIFICATION

Please contact our office for copies.

Member of